mC-Print3 Technical Details

[For developers] mC-Print3 product selection guide for USB connection

mC-Print3 Interfaces

mC-Print3 has multiple interfaces such as USB / Bluetooth / LAN to support various usage scenes.

Each model has a different interface that must be checked before purchasing.

Interface & OS list for the mC-Print3 series

We have prepared a recommended model for each mC-Print3 OS and USB type.

Connecting a Device to mC-Print3 via USB

Check the USB interface on your iOS, Android, or Windows tablet, and then check the recommended model from the chart below.

*   Please contact the software vendor for other connection patterns that are not listed.
*   The wired LAN port is installed in all models.
Note 1   Required condition of your USB-C to USB-A cable: USB 2.0 or later standard certified product / 3A or more compatible product / Cable length is 2m or less.
Note 2   Make sure that the USB Power Delivery function works properly. (Some of the devices do not have USB Power Delivery function even it has USB C port.)
Note 3   This function has been confirmed to work on Android 5.0 or later and Windows 10 or later.
(Note) * Apple, the Apple logo, iPad, iPhone, iPod, iPod touch, iTunes, Retina, Mac, Mac OS and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
  * iPad Air and iPad mini are trademarks of Apple Inc.
  * The trademark “iPhone” is used with a license from Aiphone K.K.
  * IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
  * Android is a trademark of Google LLC.
  * The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by Star Micronics Co., Ltd. is under license.

Drivers | Manuals | Developers | Technology | FAQ | Contact Star | About Us

© 2020 STAR MICRONICS CO., LTD.  All rights reserved. Reproduction in whole or in part without permission is prohibited. Site Policy